how to baste a quilt (the easy way!)

quilt, tutorial, video, tips, basting, pin basting, quilt sandwich, safety pins, how to make a quilt, quilting, modern quilting,
Let’s be real… basting quilts is NOT fun. I spent a couple of years finding a method that made it tolerable for me to complete this necessary task with minimal discomfort. Check out this video where I document my process of basting up to queen size quilts on my 60″ x 30″ 
worktable.

Here are some of my favorite tools that I use while basting:
Dritz Curved Basting Pins
Kwik Klip (make it easier on your fingers when closing your basting pins!)
Warm and Natural Batting

How do you baste your quilts? Have any tips or tricks?
Please comment below and share!



Links to specific products are selected by me and are only products that I use, love and endorse.  This post contains affiliate links.

Let's be real... basting quilts is NOT fun. I spent a couple of years finding an easy method that made it tolerable for me to complete this necessary task with minimal discomfort. Check out this video where I document my process of basting up to queen size quilts on my 60" x 30" worktable.pin basting made easy, a video tutorial, quilt, tutorial, video, tips, basting, pin basting, quilt sandwich, safety pins, how to make a quilt, quilting, modern quilting, How to pin baste a quilt the easy way! Quilt basting without crawling around on the floor. No spray. On a table with curved pins. Make a quilt sandwich and ready for walking foot or free motion quilting!

Save

Facebooktwitterlinkedinrssyoutubeinstagram
Facebooktwitterredditpinterestlinkedinmail

You may also like

49 Comments

  1. Great! I will try this next time instead of using the floor which is wear and tear on my back and knees

    1. After pinning a quilt on the rug on the LR floor yesterday (painters tape to hold down the backing, lots of luck to smooth out the batting, hoping my quilt top is centered on the batting and backing, and keeping my fingers crossed that I don’t end up with buckling and bubbling of the various layers), thanks to your tutorial, I have found the way I will sandwich my next quilt. Thank you!!!

  2. Thank you for the video.
    I do it the same way. Only thing I didn’t do was use the ruler to smooth it. Great idea. Also I moved the claps and put them back on for every layer. This is probably why I sometimes get curvy seam, instead of straight. Good to know.

    Aileen in Florida

    1. Hi Aileen, glad the video was helpful. I do find that as soon as I added more pins, it helped with the waviness. Good luck!

  3. I pin baste like this but I use the big tables at my local library and secure with painter’s tape. I pushed 2 tables together for a big quilt and ended up having to climb on the table a bit to reach the center, so I’ll have to look for the clamps. I use my kwik klip tool, but a metal crochet hook works well if I need a second tool (like if I convince my husband to help me close the pins!

  4. Thank you for an excellent tutorial. Using your technique, I was able to pin baste and machine quilt with pucker free success! I am so very happy with the result. I recommended your tutorial to my friends.

    1. Hi Marilyn, I’m so glad it was helpful and you were happy with the results! Thank you for sharing my tutorial to your friends!
      Many thanks again,
      Sheri

    1. Hi Katherine, I don’t use spray adhesive… I try to avoid spraying stuff in my studio. It’s pretty small and I don’t like inhaling things like that when I can avoid it!

  5. If you have a table that you can put a bit of tape on, take a couple of wooden skewers and tape them in the center of your table. Place a whole one on the horizontal plane in the center. Take the other and break or cut in half and lay the halves along the vertical lane at the center. As you add each layer you can feel that X through the fabric and batting as you work the wrinkles out and therefore make sure that every thing stays centered.

  6. This is one of the best tutorials I’ve seen. Excellent job of explaining and going over things clearly. Thank you so much. I’ve pieced a quilt – my first – and have been hesitant to pin it together because I wasn’t sure how to proceed. This has been perfect and I’m so glad I came across it.

  7. Hi Sheri! I found this tutorial this morning and I can hardly wait to try it on my next quilt. I have a finished quilt top waiting for quilting and this will be perfect to give this a try on. I will be heading to the hardware store this weekend for some clamps. Thank you so much for this tutorial!!

  8. Thanks for this tutorial. Unfortunately, I’m not as young as I use to be & getting on all fours is not that easy anymore. I will definitely be doing it this way from now on.

    1. Hi Bev, So happy to hear that my tutorial was helpful! I hated crawling around the floor basting. Glad to hear you’re going to give this a try!
      Happy quilting, Sheri

  9. Thanks so much for this video. I seem to have trouble lining up all of the layers when making the quilt sandwich and now I have a good understanding of how to do it. This is the first time I have seen any tips regarding batting placement and basting, so THANK YOU!

  10. While working on my first quilt, I came across your video. Thank you so much for the step-by-step instructions. Basting the queen sized quilt was an intimidating step until I saw how you lined up everything on the table. I used clamps as you suggested, and the Kwik Klip tool was extremely helpful. Now that I’m done, I feel like I can move the quilt around as much as necessary without fear of anything slipping. Thank you so much for the video!

  11. Hi Sheri: So glad I ran across this blog because I am going to sandwich my first twin quilt. I first thought about the floor but I don’t know how I would get up. I purchased 4 tables but now I don’t need but one. Thank you for your video. It is well explained.

  12. Great tutorial, beautiful quilt! I love the clamp idea and the tool for closing the safety pins. I like your table choice. Sounds like it dismantles when not in use. No Ikea on Maui but great folding tables at Costco.

  13. I use my dining room table and protect it with my cutting board. Before putting on backing, I mark center of cutting board with wooden skewers, attached with painter’s tape. I can then “feel” where the center line is without using pins.

  14. I am busy with my first quilt that will be done the right way. I just have to do my crumbcatcher and borders than I am done with my front. My previous quilts was done inside out and then turned out, can’t wait to do it this way.

  15. Hi Sheri, I’ve been doing mine on the floor when quilts didn’t fit on the table … I’ll have to give this a try. No painters tape!!! I like your systematic pinning, the rule of 4-fingers for distance, and how secure your quilt is … I’ve been spray basting and supplementing with pins, but not really enough pins for when the spray basting comes loose … may as well just do the pins well.

    One thing I’d say is that it’s worth it to get good basting pins, even though they may cost more. I’ve had good luck with Bohin. I’ve had some cheaper ones, but some had burrs and caught, and others were dull and wouldn’t go through. In the video, your pins went in so smoothly you could place them with one hand. Is there a brand you prefer?

    1. Hi Dorothy, I’m glad you found the video tutorial helpful! I hate spraying things (and inhaling it) in my Studio and unfortunately because of the nature of the weather of where I live, spraying outdoors isn’t possible. My basting life changed when I started using the table/clamp method. I hope you’ll give it a try! I haven’t used Bohin pins, but I’ve heard they are very good (and a bit pricey). Since I baste so densely, I have hundreds of curved pins in my collection! I pretty much only use the Dritz curved safety pins (size 1)—see link in the blog post and have had really good luck. Occasionally I’ll have to toss one or two here or there, but for the most part they’ve held up for years. Happy basting & quilting! Sheri

  16. I usually put the clamps back in place before inserting pins until the portion of the quilt on the. Table is pinned. This is the worst part of the whole process of making a quilt. How long does it take you to get the quilt pinbasted? I usually take 3 days!

    1. Hi Sandy, Yes—basting is probably my least favorite part of the process (second to pressing) but both are SUPER important to getting good results! I’ve found that since I’ve practiced that basting process that I demonstrated in the video, I can baste a throw quilt in about 2 hours. A queen quilt takes a little bit longer. Happy quilting!

  17. Where do i buy the plastic clamps from i live i New Zealand, so would have to order them on line but where please help me ….

    1. Hi Lynn, I was able to find them at my local home improvement store. I know in the US we can also get them through Amazon. Good luck and happy quilting, Sheri

Leave a Reply to Bev Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.